Other Parts Discussed in Thread: DS90UR241
Hi Expert,
Customer use SN65LVDT101 in new project and have question want to check. From datasheet, SN65LVDT10X is integrate resistor and no need Vbb voltage.
But from typical schematic, it still request 1.3V, is there any design without 1.3V requirement? Both SN65LVDT10X and SN65LVDS10X request VBB is must?
Customer want to add 100Ω resistor between SN65LVDT101 and DS90UR241 differential output. It should be worked. But still want to check with team.
Thank you so much.
