Q:Why is the pin configuration (CFG1, CFG2) form TUSB522P (U1) in TUSB522P EVM user guide different to TUSB522P datasheet?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Q:Why is the pin configuration (CFG1, CFG2) form TUSB522P (U1) in TUSB522P EVM user guide different to TUSB522P datasheet?
Hi Thomas,
Yes some of the pin names are different between the EVM and the final datasheet. EVMs are usually developed well before final silicon so there are often pin name changes that might not get reflected. In this case, the datasheet is correct that these pins are 2 state inputs but there are additional options that were added on the EVM.
Regards,
JMMN