• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 168 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB953-Q1: How to estimate CLKout jitter from N/M configuration??

Harry Shin1
Expert 4780 points
Part Number: DS90UB953-Q1

Hello team,

My customer tried to configure register 0x06/0x07 for CLKOUT=27MHz.

They use 954 sync mode with 24MHz Ref CLK.

I searched E2E and found jitter amount is depend of whether N/M value is integer or fractional.

if so, Could you pls let me know how to estimate jitter even rough??

Thank you.

  • +1
    TI__Mastermind 18755 points

    Hi Harry,

    CLKOUT jitter will be dependent on a number of factors but the best you can do is ensure the N/M is an integer like you mentioned.  When using an N/M integer value you can expect a few hundred picoseconds of jitter on the output.  When N/M is fractional you can expect on the order of a few nanoseconds.

    Regards,

    Nick