Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DSI85: Connection of Data Signals

Part Number: SN65DSI85

Hello team,

This question is related to the following question.

e2e.ti.com/.../4004899

The customer has changed only the data line of the SN65DSI85ZQER as follows and it does not work.

I think I see no problem with section 7.4.5, what is your opinion?

DSI-D3-P――――― DA0P   A_Y0P  ―――――A-Y3P

DSI-D3-N――――― DA0N   A_Y0N  ―――――A-Y3N

DSI-D2-P――――― DA1P   A_Y1P  ―――――A-Y2P

DSI-D2-N――――― DA1N   A_Y1N  ―――――A-Y2N

DSI-D1-P――――― DA2P   A_Y2P  ―――――A-Y1P

DSI-D1-N――――― DA2N   A_Y2N  ―――――A-Y1N

DSI-D0-P――――― DA3P   A_Y3P  ―――――A-Y0P

DSI-D0-N――――― DA3N   A_Y3N  ―――――A-Y0N

DSI-CLK-P――――― DACP   A_CLKP ―――――A-CLKP

DSI-CLK-N――――― DACN   A_CLKN ―――――A-CLKN

Regards,

Masa