• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 156 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041: How TUSB8041 power control function work?

Ruixin Feng
Intellectual 1765 points
Part Number: TUSB8041

Hi Team,

TUSB8041 has PWRCTL1/2/3/4. I was wondering how it works. When customer want downstream power switch turn off, does customer need to configure register to change the output status? Or TUSB8041 can detect if device are connected and automatically turn on/off the switch? 

Thanks!

Rayna

  • 0
    TI__Guru 60865 points

    Hello Rayna,

    Downstream port power of the hubs is controlled by the USB PORT POWER commands sent by the USB host.  The hub cannot generate these commands.

    TI does not have a tool that can force the USB host to send the commands.  Typically all ports are powered on at enumeration and off during low power modes.

    Regards,

    JMMN