Other Parts Discussed in Thread: TMS320F28388D,
We have an existing EVM (TMS320F28388D control card) which uses USB micro-B for data and power selection. For the new EVM planning to change the existing USB micro-B to USB type C.
Attaching here the existing schematic:
1. For the DRP (dual role port), we need to operate both as a host (DFP) and a peripheral (UFP) based on the CC (on type C) PU/PD ? is it possible with TUSB320HI?
2. Do we need to use the device (TUSB320HI), as our requirement is only GPIO mode but not I2C mode. Our requirement is to provide flexibility to detect DFP or UFP.
Awaiting your valuable inputs.