Other Parts Discussed in Thread: TUSB1002
Dear Sir/Madam,
We are planning to develop USB3.x Gen2 10Gbps Mezzanine Card with INTEL Host Board Arria 10 Gx Kit.
Recently we have purchased HyperLynx SI GHz Simulation EDA Tool.
We have already received IBIS-AMI Model of TUSB1002A Part.
We would like to run Channel Compliance Wizard in HyperLynx as shown with below Steps.
- We will take Test Board which has SMA Connector Input and SMA Connector Output of Differential Pair (10Gbps) with respect to TUSB1002A part
- We will assign IBIS-AMI model
- We will input various noisy pattern for simulation.
- We would like play with CTLE, DFE etc. Setting to receive desired Eye Pattern for successful compliance test.
Our question is that will IBIS-AMI Model of TUSB1002 will support this analysis in HyperLynx ?
I have checked IBIS-AMI User Guide of TUSB1002A. In this ADS Simulation Steps have shown.
We would like your support for instruction set to run simulation in HyperLynx.
Hope to hear from you at the earliest.
