DP83848K: Compliance test without link partner

Kazuki Itoh

Part Number: DP83848K

Hi team,

Is it possible to performance the compliance test for DP83848K without the link partner?
If possible, could you let me know how to configure the test setup (e.g. register settings)?

Regards,
Itoh

over 1 year ago

0 Gerome Cacho over 1 year ago

TI__Mastermind 27915 points

Hi Itoh-san,

Please take a look at the following documents to help with your request:

Page 14: https://www.ti.com/lit/an/snla239b/snla239b.pdf?ts=1657130757576&ref_url=https%253A%252F%252Fwww.ti.com%252Flit%252Fan%252Fsnla385%252Fsnla385.pdf%253Fts%253D1657130745452%2526ref_url%253Dhttps%25253A%25252F%25252Fwww.ti.com%25252Fproduct%25252FDP83848K

https://download.tek.com/manual/077001605_web.pdf

The TI document should help you with configuration settings while the Tektronix document should help with required setup.

Sincerely,

Gerome

Interface

Interface forum

DP83848K: Compliance test without link partner