This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN75DP159: Application Inquiry

Part Number: SN75DP159

Hello Team,

My customer would like to know a few details about this device. Please see customer inquiries below:

1) Do you confirm that the IC has 4x I2C addresses through EQ_SEL/A0 and (HDMI_SEL)/A1 pins ?

2) Is it possible to drive OE pin with logic gate ? We should have more than 4x ICs on the motherboard. Several ICs should have the same I2C address but OE would be high for only one and low for the other ones. Is it OK ?

3) Why 65K resistors on all cfg pins ? This resistor cannot be found. Is 64K9 OK?