• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 68 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB962-Q1: what if FPD3_MODE is 00?

Yuan Tan63
Expert 3280 points
Part Number: DS90UB962-Q1

Hi, 

From datasheet, the FPD3_MODE 00 represented for 2 status: reserved or CSI-2 mode

it's confusing. 

and when customer want to change 964 to 962, what should be paid attention to?

do we have detailed comparison for 960/62/64? thank you

B&R

Yuan

  • 0
    TI__Genius 17320 points

    Hello Yuan,

    FPD3_MODE 00 is the setting for CSI-2 Mode, which will be set by default once the device powers-up and detects a specific voltage at the MODE pin. In the 962 datasheet, the "00: Reserved" line of text is a typo and should be removed. The highlighted section is correct.

    We do not have a detailed comparison guide for the 960/962/964. Customers will have to review the first page of each datasheet for compatibility and supported features, and review the registers in each device datasheet in order to make sure a RESERVED register is not written to.

    Best,

    Justin Phan