RS485-HF-DPLX-EVM: Is there a bill of material for the non-U1 parts on the RS485-HF-DPLX-EVM ?

James Mrowca

Hi y'all:

I thought that there could be a BOM for the PCB components (outside of the user supplied U1 transceiver) - is that available/documented somewhere (it's not in the user guide)

thanks

Jim Mrowca

formerly of TI '82-'97

over 3 years ago

+1 Eric Hackett over 3 years ago

TI__Guru 74372 points

James,

An engineer has been notified of this thread and will respond by end of business on Friday CST.

Regards,

Eric Hackett

+1 Parker Dodson over 3 years ago

TI__Guru 54042 points

Hi Jim,

BOM Attached to the post.

Please let me know if you have any other questions!

Best,

Parker Dodson

rs485_half-duplex_evm_bom_Rev-B.xls

0 James Mrowca over 3 years ago in reply to Parker Dodson

Intellectual 265 points

Hello Parker:

Suggest that the BOM listing for the Sheet 1 subsection "U1 Devices Supported by this EVM" be actually cross referenced within the the link embedded within the sllu173c user guide (which could use an update) on page 2: "The EVM Tools Folder contains links to devices that work with this EVM. See RS485-HF-DPLX-EVM Evaluation board | TI.com for more information. " i.e. the link www.ti.com/tool/RS485-HF-DPLX-EVM#supported-products . Seems the user guide collatral should sync up with the webpage particularly for newer ICs.

[back in the 90's I helped source User Manual with the ASP ASIC product lines)

thanks

Jim Mrowca

Interface

Interface forum

RS485-HF-DPLX-EVM: Is there a bill of material for the non-U1 parts on the RS485-HF-DPLX-EVM ?