This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] ESD and TVS Protection Devices: All Technical Documentation

Application Notes

Protecting Automotive Can Bus Systems from ESD Overvoltage Events

ESD and Surge Protection for USB Interfaces

Automotive SerDes ESD Protection

MSP430 System-Level ESD Considerations (Rev. B)

ESD Packaging and Layout Guide

16-Bit 8-Channel PLC Analog Input Module with High Voltage (±150 V) Common Mode

Protecting I/O modules from surge events

TVS Surge Rating: Power vs. Current

Protecting ethernet ports from surge events

How to select a Surge Diode

ESD Protection for Automotive Infotainment

Choosing the Correct Models for ESD Devices

Flat-Clamp TVS Layout in SMA/SMB Footprints

TVS Surge Protection in High-Temperature Environments

ESD Protection for HDMI Interfaces

ISO 10605 Application Note

ESD224 HDMI 2.0 Compliance and Protection

Does BAV99 Really Protect My System from ESD?

TVS3300 Bidirectional Characterization

Picking ESD Diodes for Ultra High-Speed Data Lines

Capacitance Requirements for High Speed Signals

TI ESD Protection Devices and the HDMI CTS

Preventing ESD Arcing in a Connector

IEC61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 tests for TI’s protection devices

ESD Layout Guide

Analog Applications Journal

1Q 2013Issue Analog Applications Journal

4Q 2012 Issue Analog Applications Journal

Design Considerations for System-Level ESD Circuit Protection

Reading and Understanding an ESD Protection Datasheet

Selection Guides

TI Space Products (Rev. H)

System-Level ESD Protection Guide (Rev. C)

ESD by Interface Selection Guide (Rev. A)

White Papers

Demystifying surge protection

Flat-Clamp surge protection technology for efficient system protection

Designing USB for short-to-battery tolerance in automotive environments