Hi,
I am using the DS16EV5110ASQ/NOPB part in my design i have confusion with datasheet pin no 1 identification,
Kindly provide the Pin no:1 indication in the below landpattern
DS16EV5110ASQ/NOPB
Regards,
Sreekanth
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I am using the DS16EV5110ASQ/NOPB part in my design i have confusion with datasheet pin no 1 identification,
Kindly provide the Pin no:1 indication in the below landpattern
DS16EV5110ASQ/NOPB
Regards,
Sreekanth
Hi Sreekanth,
This device appears square, so there are several places where pin 1 could be placed on the landing pad. With that said, I believe you could the landing pad as marked below.
Thanks,
Drew