Hi,
We are using DP83TC814S in our application.
External 25 MHz crystal is connected on XI and X0 pins.
Is it possible to generate this 25 MHz on CLK_OUT pin? If yes, can anyone share the procedure?
Thanks for your time.
Regards,
Viswanath
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
We are using DP83TC814S in our application.
External 25 MHz crystal is connected on XI and X0 pins.
Is it possible to generate this 25 MHz on CLK_OUT pin? If yes, can anyone share the procedure?
Thanks for your time.
Regards,
Viswanath
Hi Viswanath,
The CLKOUT pin is by default a buffered version of the XI/XO signal. So as long as pin is strapped to output this instead of LED_1, GPIO_1, or GPIO_2, this should fit your criteria.
Sincerely,
Gerome