TPD2E2U06-Q1: ESD FOR CAN

Dinesh Kumar

Part Number: TPD2E2U06-Q1

Dear Team,

We are using this same part for all USB, Ethernet, I2C and CAN signal ESD protection. Is any issue if we are using this part on CAN line ESD protection or It can be used.

over 1 year ago

0 Sebastian Muriel over 1 year ago

TI__Genius 13640 points

Hi Dinesh,

What signal speed are you using for Ethernet? I'd recommend the TPD4E05U06-Q1 if you're using 1Gbps Ethernet.

If you want to use a 2-ch device and your signal speed is less than 1Ghz, the TPD2E2U06-Q1 is a good fit.

For I2C the TPD2E2U06-Q1 is a good fit.

For the CAN interface I'd recommend the ESD2CAN24-Q1.

What type of USB are you protecting? (2.0, 3.0, type C.. etc)

This FAQ has device recommendations for common interfaces including an automotive list.: (+) [FAQ] What TI ESD/TVS diode should I use to protect Interfaces in my system? - Interface forum - Interface - TI E2E support forums

Regards,

Sebastian