• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 186 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCA9406: alternative device with higher B-port rise time

Fanbin Meng
Expert 6350 points
Part Number: TCA9406

Hi Team,

My customer use TCA9406 for a I2C level shift application, I2C data rate is 1MHz/s

After the SI simulation, they found that the signal come from slave to the B port would fail the B port rise/fall time spec.

Could you help recomended the alternative device with higher max rise time(300ns would be great)

  • +1
    Guru 281530 points

    These entries describe the TCA9406's output signals.

    The TCA9406 does not have any timing requirements on open-drain input signals.

  • +1
    TI__Mastermind 32233 points

    Hi Fanbin,

    I agree with Clemens' statement. These switching characteristics are for the output signals. There are no specific timing requirements needed by the device on open-drain input signals. Please abide by the I2C standards when configuring timing specs. 

    If you want to double-check the simulations, check to see if the output waveforms agree with the min/max specs of rise/fall times as listed in the datasheet. 

    Regards,

    Tyler