This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD12S016: CEC pin need add an external diode or not?

Part Number: TPD12S016
Other Parts Discussed in Thread: TPD12S521,

Refer to the below link and comparing with its application schematic of TPD12S521, should we add an external reverse schottky diode on TPD12S016’s CEC pin.

And, why the pull-up(26K ohm) was integrated into the IC pin? Thank you.

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/615308/tpd12s521-about-the-sch-for-tpd12s521

-  TPD12S016