DP83TG720S-Q1: sleep interrupt

Chuqiang Wen

Part Number: DP83TG720S-Q1

Hi Expert,

May you help confirm below question?

For the sleep_int_en, how to understand the sleep mode change interrupt status? The interrupt status will assert under both enter sleep mode from normal mode and leave sleep mode to normal mode, correct?

And bit 1 represents for sleep mode change status monitored?

Thanks!

Ethan Wen

over 1 year ago

0 Gerome Cacho over 1 year ago

TI__Mastermind 27915 points

Hi Ethan,

I am looking into this with our team. Please allow for a few days while we discuss. I expect to get feedback to you EoD Thursday.

Sincerely,

Gerome

0 Gerome Cacho over 1 year ago in reply to Gerome Cacho

TI__Mastermind 27915 points

Hi Ethan,

Please disregard this setting. There is no functionality attached to these bits. We will look to refresh in the next datasheet revision to correct for this.

Sincerely,

Gerome

0 Chuqiang Wen over 1 year ago in reply to Gerome Cacho

TI__Expert 4580 points

Hi Gerome,

To be clear, do you mean that there is no functionality attached to sleep_int bit? This bit will not be asserted under both enter sleep mode from normal mode and leave sleep mode to normal mode, correct?

Or you mean no functionality include all the int bit in 0x13 register?

Thanks!

Ethan Wen

0 Gerome Cacho over 1 year ago in reply to Chuqiang Wen

TI__Mastermind 27915 points

Hi Ethan,

I meant to say this for sleep_int and its respective enable bit. It should not assert under any circumstance as there is no functionality associated with it.

Sincerely,

Gerome

Interface

Interface forum

DP83TG720S-Q1: sleep interrupt