This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FPC402: What to do with unused ports on PWB design

Part Number: FPC402

Hello,

I am planning to use an FPC402 to control two SFP+ connectors. Does anything need to be done with the two unused ports on the CCA design, or can all of their signals be left unconnected? I know that there is a 2-port controller available but my team already has experience with the FPC402 so we want to stick with it on this new design.

Thanks.

Courtney