• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 79 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041: Schematic check

Tonyx.wu
Intellectual 845 points
Part Number: TUSB8041

Please help to see if the schematic diagram is correct？

TUSB8041IRGCR_SCH_20221230.pdf

  • 0
    TI__Guru* 78390 points

    Hi Tony:

    1: where is upstream port connected to, host or UBS connector?

    2: OCP need to pull up to 3.3v, not 5v

    3: since you support power switching, pin 40 need to pull down.

     others looks fine.

    Regards

    Brian