Other Parts Discussed in Thread: USB-2-MDIO
Hi there
I use a DP83869HM connected to a AM64 over RGMII and want to make compliance tests. I've cut the MDIO lines open and connected a MSP430 Launchpad to the PHY as described in SNLA239B.pdf.
In USB-2-MDIO software all PHY IDs 0 to 31 are listed as available. No matter what register I read, they are all 0000. If I start the 100Mbit compliance script there is no output at the Ethernet port.
What am I doing wrong?
Best regards