• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 121 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TC812S-Q1: DP83TC812S-Q1 PHY Slave Mode

Annamalai Lakshmanan
Prodigy 250 points
Part Number: DP83TC812S-Q1

Dear TI Team,

We have tried to configure the DP83TC812S-Q1 PHY in Slave mode, and we have a Technica Media Converter which is switched to Master Mode.

The Slave configuration are done via SW as per following sample code from TI:

https://git.ti.com/gitweb?p=ti-analog-linux-kernel/analog-linux.git;a=blob;f=drivers/net/phy/dp83tc812.c;h=0c594375f188d40299603628a0636947cfea35bf;hb=f973f3deb81b1f44aa4c33b275a342e28fc982fd

We see in the above configuration PHY could not work in Slave mode, Could you have any recommendations ?

Any thins wrong in the HW side ?

Regards

Annamalai