Can PCA9306 be used for level shifting of common signals, such as GPIO signals (Push-pull), from 1.2V to 1.8V? Thanks a lot!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can PCA9306 be used for level shifting of common signals, such as GPIO signals (Push-pull), from 1.2V to 1.8V? Thanks a lot!
Hello Ding,
This device can be used for GPIO signals, however also see the SN74LXC2T45 and these GPIO level translators as they provide higher drive strength as needed.
Regards,
Jack