TIOL1123: Master Transceiver

Joseph Wong

Part Number: TIOL1123
Other Parts Discussed in Thread: BOOSTXL-IOLINKM-8, TIOL112, LP-AM243

Hello,

From the datasheet and EVB I see it's possible to run this TIOL1123 as an IO-link master transceiver. Does TI have a way for us to evaluate this IC in a full IO-link master setup (+controller and stack), talking to an IO-link device? We don't need full IO-link compliance, we just want an on-board solution to access the full functionality of a specific IO-link sensor we are using.

Joseph

over 1 year ago

0 Eric Hackett over 1 year ago

TI__Guru 59802 points

Joseph,

An engineer has been notified of your question and will respond by end of business CST on 02/03/2023.

Regards,

Eric Hackett

+1 Jonathan Nerger over 1 year ago

TI__Mastermind 19240 points

Hi Joseph,

Yes, TI has developed a solution using the Sitara LP-AM243 LaunchPAD and an 8-port IO-Link Master BoosterPack board (BOOSTXL-IOLINKM-8) that uses the TIOL112 for the IO-Link PHY and this board is in the final stages of our inventory stocking and release process. It should be publicly available within the next month.

Additional information can be found in the following links:

Eight Port IO-Link Master Reference Design

IO-Link Master Stack including example application

AM243x LaunchPadTm development kit for Arm® Corte®x-R5F-based MCUs

Regards,

Jonathan

Interface

Interface forum

TIOL1123: Master Transceiver