Hi,
According to the presentation, there is no specified AC caps location for chip to chip.
I would like to know whether there is specified length or limitation or placing AC caps at receiver side?
Thanks and Best regards,
Tiger
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
According to the presentation, there is no specified AC caps location for chip to chip.
I would like to know whether there is specified length or limitation or placing AC caps at receiver side?
Thanks and Best regards,
Tiger
Hi Tiger,
AC coupling caps should be placed immediately after transmitter on receiver side in chip to chip connections typically.
Regards,
Vicente
Thanks for reply, Vicente.
Do we have specified position spec?
Like as the Add-In-Card showed in slide.
Best regards,
Tiger
Hi Tiger,
To clear up my last response, AC coupling caps should actually be placed as close to the receiver as possible.
Regards,
Vicente