• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 156 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867CS: Interfacing SGMII or RGMII to LVDS

Hamilton Henneberg
Prodigy 10 points
Part Number: DP83867CS
I am trying to design a PCB to interface a Xilinx 7-series FPGA to an ethernet PHY over LVDS (Spacewire) using a Micro D9 connector, and was wondering if the DP83867CS using either SGMII or RGMII is a good choice and has the correct pinouts for what I'm trying to do.
  • +1
    TI__Genius 17810 points

    Hi Hamilton,

    We have not tested such a configuration, but it should theoretically be possible, since SGMII is LVDS. Unfortunately we cannot provide any data or recommendation for such a case, other than the cable should be as short as possible.

    Thanks,

    David