• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 57 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FPC402: Can FPC402 set baud rate? what is the time gap limitation between each I2C frame?

Ann_Lien
Genius 9300 points
Part Number: FPC402

Hello expert,

As title, when CPU try to access FPC402 via I2C, could FPC402 define I2C baud rate ?

Or what is the time gap limitation between each I2C frame ?

Best regards,

Ann Lien

  • 0
    TI__Guru* 83625 points

    Hi Ann,

    Minimum time gap you are referring is called bus free time or time between STOP and START condition of I2C interface.  

    Please note FPC402 parametric table. On the host side this is called tBUF and it is 0.5uS minimum. On the other hand, on the port side, this is called tBUF again and it is 20uS(minimum).

    Regards,Nasser