This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCA9536: How to configure the default P0 state to Low

Part Number: TCA9536

Hi Experts,

My customer wants to output logic Low on P0 pin when power-on. Since the initial state is that internal FET Q1 and Q2 is off and 100K PU resister is enabled, is it OK to use external pull-down resister like 4.7k ohm?

Regards,

Uchikoshi