DS90UB954-Q1: debug about ds90ub954

zhangpeng

Part Number: DS90UB954-Q1

We have an imx390 sensor with an internal isp that connects to the serses as imx390-- >ds90ub953-- >ds90ub954. I set the device tree with name_overlays= k3-am62a7-fpdLink-SK-funix.dtbo K3-J721e-fpdLink-imx390-rcm-0-dtbo I wonder if this is correct and if it needs to be amended

Here is camera module structure:

10 months ago

0 Zoe Bison 10 months ago

TI__Genius 10115 points

Hello Zhangpeng,

I suggest reaching out to the processor team for support regarding proper naming for the device tree.

Can you share if there are errors seen regarding the DS90UB954?

Best,

Zoe

0 zhangpeng 10 months ago in reply to Zoe Bison

Prodigy 120 points

0 zhangpeng 10 months ago in reply to Zoe Bison

Prodigy 120 points

when DS90UB953. ko and DS90UB954. ko are directly loaded，we still need to configure the ds90ub953 and ds90ub954 some registers？

0 Glenn Uranga 10 months ago in reply to zhangpeng

TI__Genius 10190 points

Hi Zhangpeng,

It depends on what you are trying to do with the 953/954. Did you get a chance to talk to the processor team? Do you have the initiation code being used on the 953/954.

Glenn

0 zhangpeng 10 months ago in reply to Glenn Uranga

Prodigy 120 points

Thanks you，I have debug successful

0 Glenn Uranga 10 months ago in reply to zhangpeng

TI__Genius 10190 points

Zhangpeng,

Glad you got everything working successfully.

Glenn

Interface

Interface forum

DS90UB954-Q1: debug about ds90ub954