This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB954-Q1EVM: Running BIST using ALP and DS90UB953/954

Part Number: DS90UB954-Q1EVM
Other Parts Discussed in Thread: ALP

Hello TI support,

I have a setup with DS90UB954-Q1EVM and a self designed PCB assembled with DS90UB953. The two boards are connected via Fakra connector and a coax cable.

The EVM is connected via USB and ALP is running. It's possible to control the GPIO of the 953 by setting the remote register. The test script ''

is running well. Also the margin analysis look great.

I load the '' script. After execution time 15.719 sec. there is a text like a report which a I can't interpret. Please see attached file:

My question: Has the script run succsesfully?