• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 101 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS100MB203: USB 3.0 Support

DS100MB203: Fan-out USB3.0 Rx pair data

Tsz Chung Mok
Prodigy 10 points
Part Number: DS100MB203

Hello,

I witness the parts do not support USB3.0 interface.

If I want to fan-out the Rx pair of the incoming USB3.0 data, what choice I can pick from?

Best regards,
Ivan

  • 0
    TI__Mastermind 23022 points

    Hi Tsz,

    We do not have any USB-specific signal conditioners with fanout capabilities for this.

    DS100MB203 is protocol agnostic, so it may be compatible with your application.

    Please share more information about the application requirements (block diagram, expected insertion loss, data rate, ...) so I may see if DS100MB203 is an appropriate choice.

    Thank you,

    Evan