• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 212 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS160PR410: Is it possible to use USB Interface Adapter instead of USB2ANY to configure the DS160PR410

Amy Luo
Expert 6895 points
Part Number: DS160PR410
Other Parts Discussed in Thread: USB2ANY

Hi team,

USB2ANY is mentioned in the DS160PR410 EVM User's Guide, must the DS160PR410 be configured with USB2ANY? Can I use TI's USB Interface Adapter to configure the DS160PR410?

What is the difference between USB2ANY and USB Interface Adapter, can they be replaced by a software upgrade?

Best Regards,

Amy Luo

  • +1
    TI__Guru* 93570 points

    Hi Amy,

    Using USB2ANY enables you to use DS160PR410 GUI to configure the device. 

    You can use any I2C controller to change different register settigs. Using USB2ANY enables you to have a graphic interface to control the device.

    Regards, Nasser