Hi ,
how much common mode noise TS3USB221RSER adds to the signal . Application is for using for USB2 application.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi ,
how much common mode noise TS3USB221RSER adds to the signal . Application is for using for USB2 application.
Hi Dilip,
Unfortunately, this is not a value that TI specs for this device.
Please let me know if you have any other questions.
Thanks,
Ryan
Let me know if it is possible to get intra pair skew of the +/- pins for 2 paths if you have?
Hi Dilip,
Are you asking for allowed levels of skew, or skew in the device itself? For layout with the device, we recommend the skew be as close as possible, within 2 mils of skew if possible.
If you mean otherwise, please let me know, and I'll get that answered for you.
Thanks,
Ryan