Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 197 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LV032AQML-SP: -MLS MANUFACTURING FLOW (DS90LV032AW-MLS(

Manuel Padial
Prodigy 30 points
Part Number: DS90LV032AQML-SP

Hi

 Being DS90LV032AQML-SP not full QML V qualified but manufactured as DS90LV032AW-MLS against MLS TI flow

Could you plesae be so kind as to share the -MLS manufacturing flow?

Is ther any periodic QCI/qualification on this component?

Thanks and regards

Manuel

  • 0
    TI__Mastermind 26566 points

    Manuel,

    Please pardon our delay during the holiday. One of our experts should be able to get back to you mid next week after our return.

    Happy New Year!

    -Danny

  • 0
    TI__Prodigy 240 points

    Hello Manuel, 

    The 'MLS' designates that this device is processed to space-grade but is not on an actual SMD from the Defense Logistics Agency. In this case, DS90LV032AW-MLS follows MIL-PRF-38535 Groups A, B, C, and D (this device is non-RHA and therefore does not have Group E testing). 

    There is QCI / PCR data available for this device as well. 

    Thank you, 

    Shannon Lippincott

  • 0 in reply to Shannon Lippincott
    Prodigy 30 points

    Dear Shannon

    Many thanks for the info

    Could you please be so kind as to share the TI document which includes/details the -MLS manufacturing flow?

    Thanks in advance for your help

    With my best regards

    Manuel Padial

  • 0 in reply to Manuel Padial
    TI__Prodigy 240 points

    Hi Manuel, 

    'MLS' devices exactly follow the MIL-PRF-38535 specification. These devices fully follow the QML-V flow of MIL-PRF-38535 but cannot be on an SMD due to some technicality. In this particular case for DS90LV032AW-MLS the wafer fab is TSMC, which is not qualified to MIL-PRF-38535 by the Defense Logistics Agency for QML products. Other than the caveat of the wafer fab not being qualified by the DLA, this device follows the 38535 standard exactly. I don't have any TI-official documents, but hopefully this helps. 

    Thank you, 

    Shannon Lippincott