This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TD510E-EVM: DP83TD510E-EVM Resistor issue

Part Number: DP83TD510E-EVM

The resistor modification, must you removing R199/200, and changing R24 to 0ohm ,for the device to work accurately ? also where does the 0ohm resistor come from is that something we must purchase are self? Or is it a resistor on that board that we can move to that location?

  • Hi Yaw,

    Yes, the resistor modifications must be made for the EVM to work as is.

    If you do not have access to any 0ohm resistors, you can desolder and use R209 without affecting the EVM functionality.

    Thank you,

    Evan