This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867IS: Straping

Part Number: DP83867IS
Other Parts Discussed in Thread: DP83867E


We would like to use the TI part DP83867ISRGZ Ethernet Phy for our new design, which will support both SGMII & RGMII.

Now the design we are focusing   is for supporting SGMII.

While referring the DP83867E ERGZ -S- SGMII EVM userguide for resistor strapping option,it was found that R6 is showing 2.49K.But in BOM R6 shows11.0K.

Can you please advise on which i should follow.