DP83867ERGZ-S-EVM: Need CAD file or mounting hole dimensions

LIAM O'CONNELL

Part Number: DP83867ERGZ-S-EVM
Other Parts Discussed in Thread: DP83867IS

I am looking to purchase this part but I need to know if it will fit in my enclosure. I cannot fin any information online on the mounting hole pattern. It would be best to have a CAD file but any info would be helpful.

7 months ago

0 Hillman Lin 7 months ago

TI__Mastermind 22425 points

Hi Liam,

May I ask which mounting hole are you mainly looking for? a picture would be helpful

Regards,

Hillman Lin

0 LIAM O'CONNELL 7 months ago in reply to Hillman Lin

Prodigy 10 points

0 Hillman Lin 7 months ago in reply to LIAM O'CONNELL

TI__Mastermind 22425 points

Hi Liam,

Those mounting holes are 0.006 inches^2.

Regards,

Hillman Lin

0 LIAM O'CONNELL 7 months ago in reply to Hillman Lin

Prodigy 10 points

Hi,

I need to know their dimensions in relation to the board. Their positions. The layout of the holes, x and y position from the edge so I know where to put mounting holes.

0 Hillman Lin 7 months ago in reply to LIAM O'CONNELL

TI__Mastermind 22425 points

Hi Liam,

We can share you the altium files information through the email.

Regards,

Hillman Lin

0 LIAM O'CONNELL 7 months ago in reply to Hillman Lin

Prodigy 10 points

That would be ideal thank you

0 Hillman Lin 7 months ago in reply to LIAM O'CONNELL

TI__Mastermind 22425 points

Hi Liam,

I request you as an friend in E2E and I will share email information through the friend chat in E2E.

Regards,

Hillman Lin

0 Hillman Lin 7 months ago in reply to Hillman Lin

TI__Mastermind 22425 points

Hi Liam,

Unfortunately, we don't have the altium file for DP83867IS EVM. We only have fabrication file. Hope this is information is helpful to you.

Fabrication.zip

Sincerely,

Hillman Lin

Interface

Interface forum

DP83867ERGZ-S-EVM: Need CAD file or mounting hole dimensions