This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DPHY440SS: SN65DPHY440SS Retimer inquiry

Part Number: SN65DPHY440SS

Hi team,

Customer get following question about SN65DPHY440SS: could you help check comments?

The retimer spec says the highest EQ level is for channel insertion loss of 4dB@500MHz,is it means when the total insertion loss is below 4dB@500MHz(1Gbps signal rate),the retimer can receive the correct data by EQ level 3.

It seems the capability of retime is much stronger than the requirement of MIPI standard(-2dB@ Nyquist frequency), am I right?

Thanks and Best regards,