TPD4E05U06-Q1: Simulation Model for TPD4E05U06-Q1

Hello Team,

I got S-Parameter model for TPD4E05U06-Q1, & used for simulation. Regarding connection, i have below query.

1. 1-pin to Signal & 2 pin to GND. This case i am not getting waveform at the receiver end

2. 1-pin to Signal & 2-pin to same signal in other end. This case i am getting proper waveform at the receiver end.

From the above two cases, which one is correct?

Also, do we have SPICE model for the part?

Thanks,