• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 147 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HD3SS3212: TIDA-01243 INTENTIONALLY SWAPPED

Jinwook Baek
Prodigy 50 points
Part Number: HD3SS3212
Other Parts Discussed in Thread: TIDA-01243,

Tool/software:

Hi, I have a question in the reference schematic of TIDA-01243.

Why is the +/- in the HD3SS3212 mux output on sheet 9 reversed? --> intentionally swapped

Plz, let me know about this.

  • +1
    TI__Guru**** 161036 points

    Hi,

    The polarity swap is done to ease the PCB signal routing. It is OK to swap the polarity as the HD3SS3212 is a passive switch so the inversion does not affect its functionality and USB3 spec allows the polarity inversion, it detects and compensates the swapping during the link training. 

    Thanks

    David