• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1465-Q1: CAN message: Cyclic vs Cyclic On Change

Jeevan Guptha
Prodigy 10 points
Part Number: TCAN1465-Q1

Tool/software:

Hi there,

I am sending the CAN messages to my unit

there are 3 types of messages here. Event message, Cyclic message and Cyclic On Change message

I'm trying to simulate these CAN messages to my unit.

I want to know the difference between Cyclic and cyclic on change messages.

This is to address an issue that what should I do to send cyclic message and what should I do to send Cyclic On Change message.

Please help

  • 0
    TI__Guru 72242 points

    Jeevan,

    What kind of CAN simulation tool are you using? I'm not sure exactly what cyclic on change CAN messages are, so I'm not sure when they should be sent. Can you give more detail on what exactly you are trying to simulate?

    Regards,

    Eric Hackett