DS320PR1601: REDRIVER

SHEKHA SHOUKATH

Part Number: DS320PR1601

Tool/software:

I was not able to install DS320PR1601 profiler, as it pop up with msg " Kindly install SigCon Architect EVM GUI v3 3.2.0.1".

kindly provide the link the to download the same.

Thanks and Regards,

Shekha Shoukath

0 Nick Peabody 10 months ago

HI Shekha,

and click download here:

You can then go through the installation instructions for

Then you can install the 1601 profile.

Best,

Nick

0 SHEKHA SHOUKATH 10 months ago in reply to Nick Peabody

Hi,

Thank you for providing access.

But DS320PR1601 is not listed under supported products and hardware for the said link.

When I try to install DS320PR1601.exe, then TI SigCon Architect v3 DS320PR1601 updater pop up message will be displayed.

I think SigCon Architect v3 3.2.0.1 or later is required.

The current version from the link provided is v3 3.0

Thanks and Regards,

Shekha Shoukath

0 Nick Peabody 10 months ago in reply to SHEKHA SHOUKATH

Hi Shekha,

No problem. Please view the zip file below:

This will have SigCon Architect v3.2 installer and DS320PR1601 GUI profile installer

Best,

Nick

Interface forum