This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS91M125: Question of Datasheet Information

Part Number: DS91M125

Tool/software:

I would like clarification of the output pins for the DS91M125.

Page 3 of the datasheet (SNLS290C) there is a Logic Diagram and a Pin Descriptions table. The diagram shows pin B0 as an inverting pin and pin A0 as a non-inverting pin, but the table shows the opposite?

Which is correct?

  • Hi Richard,

    The table on page 3 lists A0 as the "non-inverting driver output pin" and B0 as the "Inverting driver output pin". 
    It appears to me that this matched the block diagram drawing. 

    Please check on this again and let me know if you have any other questions.

    Regards, Amy