• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 72 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LMH0302: How to improve eye diagram

LMH0302: Eye Diagram not good and application not working

Electrodude
Prodigy 30 points
Part Number: LMH0302

Tool/software:

Hello

We have problems getting HD-format picture from LMH0302. And seems like eye diagram is not good:

Application is taken from datasheet, is there some component values that could be adjusted to get application working?

Thanks and Best Regards,

Olli

  • 0
    TI__Expert 6730 points

    Hi Olli,

    The unused output is terminated 75 ohms as recommended and the SDO output has the recommended value for filtering elements and resistances. Let me know if you would like more feedback on the schematic overall.

    Best,

    Nick