Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

DS90LV048A: DS90LV047A DS90LV011A DS90LV012A

Part Number: DS90LV048A

Tool/software:

如果用这些芯片,将SPI信号转换为LVDS信号,进行板间通讯的话,是否可以不必将主模块的CLK信号再重新反馈回主模块?

  • This depends on the propagation delays and the clock frequency. You need a feedback clock when the four propagation delays (logic-to-LVDS and LVDS-to-logic for MOSI plus logic-to-LVDS and LVDS-to-logic for MISO) are so large that the signal edges at the master's MISO pin arrive later than the current clock pulse.

  • Hello,

    Could you post this question in the English language?

    Thank you,

    Amy