AM26LV31E-EP: Rs422 signal driver AM26LV31E-EP unused input pin connection

Rohit Bhayal

Prodigy 20 points

Part Number: AM26LV31E-EP

Tool/software:

Hii,

For the AM26LV31ESDREP IC, if certain drivers are not in use, where should the unused input pins be connected?

Should they be grounded or connected to VCC?

2 months ago

0 Clemens Ladisch 2 months ago

Guru 286620 points

The CMOS inputs and outputs are symmetrical. It does not matter whether you connect them to GND or VCC:

0 Ethan Sempsrott 2 months ago

TI__Expert 5396 points

Hi Rohit,

Unused inputs can be connected to GND or VCC. However, I would recommend GND so there is no leakage current if connected to VCC. This keeps the supply current as low as possible.

Best,

Ethan

Interface

Interface forum

AM26LV31E-EP: Rs422 signal driver AM26LV31E-EP unused input pin connection