• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 71 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH0002: fpga GTPs and lmh0002 cable driver interface support

anusha kodali
Prodigy 60 points
Part Number: LMH0002

Tool/software:

for providing output of the SMPTE 292M video data from the FPGA we want the physical layer interface between FPGA and coaxial cable for that we want to use the LMH0002 cable driver.

we want to conformation about that interface, Is lmh0002 cable drivers can support that interface or not and also kindly provide the any previous interfaces are exiting.

thanks and regards,

sudha.

  • 0
    TI__Expert 8708 points

    Hi Sudha,

    Hope you are doing well.

    The LMH0002 supports a differential input of 100 ohms. That could be from the FPGA. And it can drive 75 ohm single ended outputs of SMPTE292M.

    Please let me know if you have more questions.

    Best Regards,

    Nick