• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 34 subscribers
  • Views 56 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MAX232E: Failure Condition

Hideki Hayashi1
Expert 7940 points
Part Number: MAX232E

Tool/software:

HI team,

Customer ask a situation when VS+ /VS- are not recoomended condition by accident.

Q1: When VS+ or V2- are open, what does it happens?

Q2: When a GND which VS+ / VS- connected thru 1uF become floating, what does it happens? The condition is equivalent to VS+ and VS- are connected thru series 1uF caps.

Actually, customer can communication in the Q2 situation, but wants to know how it affect.

Regards,

Hayashi

  • 0
    TI__Mastermind 37745 points

    Hi Hayashi,

    Today is a US holiday. Please help give some time for expert feedback, thanks.

    Best Regards,

    Michael.

  • +1
    Guru 296430 points

    The capacitors at V+ and V− are needed as storage for the charge pumps. Without them, the output bus voltages cannot be generated.

    When the ground between them is floating, then it will end up somewhere in the middle between the outputs of the two charge pumps, depending on their strength. It will be approximately correct, but there is no guarantee that the output voltages will actually be correct.