• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 463 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Gerber file for USB 3.0 repeater SN65LVPE502CP EVM

Jing Li
Prodigy 10 points
Other Parts Discussed in Thread: SN65LVPE502CP

Hi,

I am Jing Li from MIssouri S&T. I have ordered USB 3.0 repeater SN65LVPE502CP EVM, is there anybody who can help me to find where its gerber file?

Since I only want the radiation or noise from the chip SN65LVPE502CP, but the signal traces from IC could also radiate a lot which I do not want, with gerber file probably I will try to modify some traces and run them immediately to the other side of the board, where the IC pins touch the pads.

Also I heard of that usually each IC will be performed EMI test before it manufactured, so if possible, could I have a TEM cell board of SN65LVPE502CP which is designed for EMI test?

 

Thanks a lot for your great help!

Thanks,

Jing