This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLK100 Design & Layout information needed

Other Parts Discussed in Thread: TLK100, TLK110

Hello, all.

Now we are designing TLK100 on our power meter application.

Then, I would like to know about the hardware design hint on the layout.

As I could find your manual, 1469 PHYTER® Design & Layout Guide, which literature number is; SNLA079C, this seems not be aimed for TLK100.

Please let us know whether we could refer this guide into the case that we use TLK100 as well.

Thank you in advance for your information.

Best regards,

  • Hi,

    We don't have a dedicate design and layout guide for TLK100.

    You can use the 1469 PHYTER® Design & Layout Guide (SNLA079C) for general design tips, with the following exceptions:

    • The PINOUT of the TLK100 is different when compared to TLK110 or the DP parts
    • The TLK100 requires external POR
    • If using external oscillator for Xi one need to make sure its level is 1.8v
    • The TLK100 can work with either external 1.1v and 1.8v power supplies or use a single 3.3v supply and activate the internal LDO's for 1.1 and 1.8
    • You can browse through the DS at: http://www.ti.com/product/TLK100 check design guidelines and power supply configurations.
    • External voltages customer EVM "TLK100EXTEVM User Guide"  look at page 4 for a brief on the block diagram.
    For any further information, feel free contacting me by mail (noam.sadan@ti.com).
    Thanks,
    Noam